Beginning with QSM 4.2, XEVO 3.2 and KSM 1.1, go to Monitor > Usage to view controller resource usage. Select CPU or Memory from the left pane to display the corresponding usage charts.
For dual-controller systems, XInsight displays separate charts for Controller 1 and Controller 2. The number of charts displayed may vary depending on the controller configuration.
View CPU Usage #
Select CPU in the Usage panel on the left to view the CPU utilization of each controller over the selected monitoring period.
CPU usage is displayed as a percentage. The current utilization value appears in the lower-right corner of each chart. Periods for which monitoring information is unavailable are marked No Data.
View Memory Usage #
Select Memory in the Usage panel on the left to view the memory consumption of each controller over the selected monitoring period.
Memory usage is displayed in gigabytes (GB). The value in the lower-right corner of each chart shows the currently used memory and total available memory.
For example:
Memory Usage: 9.58 GB / 24.00 GB
This indicates that the controller is currently using 9.58 GB of its total 24.00 GB of memory.
Periods for which monitoring information is unavailable are marked No Data.
Select a Monitoring Period #
Use the time-range menu in the upper-right corner to select the period covered by the charts:
- Hour
- Day
- Week
- Month
- Year
Selecting a different period refreshes the charts with usage data from the corresponding time range.
Adjust the Chart Time Range #
Use the range slider below the charts to adjust the displayed time interval.
Drag either handle toward the center to narrow the time range and zoom in on a specific period. Drag the handles farther apart to widen the time range and zoom out. The timestamps beside the slider indicate the beginning and end of the displayed interval.
